| Transmitter;
P/N 62008 |
| SUBCARRIER CENTER PERIOD
(T-out) |
2 milliseconds to 100
microseconds (500 Hz to 10 kHz); typical at 625 microseconds
(1.6 kHz) |
| DEVIATION PERIOD WIDTH |
100 microseconds (Typical)
|
| LINEARITY |
+/- 0.2% with respect to
subcarrier period deviation |
| PERIOD RESPONSE |
20% of subcarrier center
period |
| SENSITIVITY |
LVDT - Typically 0.5
microseconds per ft-ton (US) at subcarrier center period Strain
Gauge - a multiple function of LVDT sensitivity |
| CARRIER FREQUENCY |
10.7 MHz, screwdriver
adjustable over +/- 1 MHz range RF |
| POWER OUTPUT |
Typically 6 milliwatts into
150 ohm load |
| POWER REQUIREMENTS |
+/- 5 VDC, 10 mA, power
regulated, transient protected |
| OPERATING TEMPERATURE |
40 to 149° F |
| REPEATABILITY |
< 0.1% of measurement |
| STABILITY |
0.1% from 60 to 150° F |
| INPUT IMPS |
> 30 kilohms |
| CALIBRATION |
Digital Auto-Reference |
| FM DEVIATION |
150 kHz |
| RANGE |
0 to > 1000 ft-tons (US)
|
| PHYSICAL CHARACTERISTICS |
|
|
Dimensions
|
length 15"; height 3";
width 3" |
|
Weight
|
4 lbs |
|
Electrical Connections
|
Nylon connectors |
|
Construction
|
RTV protected circuitry |
| TYPICAL MEASUREMENT RANGE |
20 to 1500 microstrain
(strain gauge) +/-0.05” (LVDT) |
| LINEARITY |
< 0.6% of full range |
| STABILITY (40 to 149° F) |
0.015% drift of
temperature range typical transmitter
0.01% drift of temperature range typical receiver |
| REPEATIBILITY |
Better than 0.2% over
temperature and voltage |
Specifications subject to change without notice
See also A03-28 Shaft Horsepower Installation Photo
McNab
accepts all major credit cards.
